OILS

НС4 AND НС7 BASE OILS (API Group III) are produced in accordance with TU BY 300042199.037–2015, TU BY 300042199.062–2017 and as per contract parameters.

No. Property НС4 НС7
1 Kinematic viscosity at 100 °C, mm2/s 4.0–5.0 6.5–7.5
2 Viscosity index, min 120 120
3 Sulfur,% wt., max 0.03 0.03
4 Pour point, °C, max Minus 15 Minus 15
or    
Flow point, °C, max Minus 12 Minus 12
5 Open cup flash point, °C, min 200 220
6 Self‑ignition point, °C, min 230 240
7 Water,% wt., max traces traces
8 Evaporation losses% wt., max 18.0 7.0
9 Color:
on colorimeter, CNT units, max as per ASTM, max
1.5
1.5
2.5
2.5
10 Mechanical impurities,% wt., max Absence Absence
11 Solvent refining agents,% wt., max 0.3 0.3
12 Density at 15 °C, kg/m3 823–863 825–865

“SN 150”, “SN 500” and “SN 1200” BASE OILS (API Groups I–II) are produced in accordance with TU BY 300042199.060–2016 and as per contract parameters.

No. Property SN150 SN500 SN200
1 Appearance Clear and transparent
2 Kinematic viscosity at 100 °C, mm2/s 4.3–5.5 10.1–11.5 19.0–22.0
Kinematic viscosity at 40 °C, mm2/s, min not specified
3 Viscosity index, min 115 90 90
4 Color: on colorimeter, CNT units, max 1.5 3.5 6.0
or      
as per ASTM, max 1.5 3.5 6.0
5 Pour point, °C, max or
Flow point, °C, max
Minus 15
Minus 12
6 Coking capacity,%, max not specified 0.5
7 Mechanical impurities,% wt., max 0.005
8 Water mass fraction, max traces
9 Evaporation losses% wt., max 13.5 5.0 3.0
10 Density, kg/m3
–  at 15 °C or
–  at 20 °C

Not specified, definition is mandatory
11 Acid number, mg КОН / 1 g of oil, max 0.02 0.05
12 Ash content,% wt., max 0.005
13 Sulfur mass fraction, max 0.3 1.0 1.2
14 Solvent refining agents content,% wt., max
– including phenol,% wt., max
0.3
0.002
15 Open cup flash point, °C, min 215 250 260
16 Self‑ignition point, °C, min 380 375 370

I-20А, I-30А, I-40А, I-50А INDUSTRIAL OILS are produced in accordance with GOST 20799–88 and are intended for use in machinery and tools of industrial equipment which operating conditions do not impose special requirements on anti- ageing and anticorrosion properties of oils. Such oils can also be used as hydraulic liquids and base oils.

No. Property I‑20А I‑30А I‑40А I‑50А
1 Kinematic viscosity at 40 °C, mm2/s 29–35 41–51 61–75 90–110
2 Acid number, mg КОН / 1 g of oil, max 0.03 0.05 0.05 0.05
3 Ash content,%, max 0.005
4 Sulfur in oils produced from sour crudes,% wt., max 1.0 1.0 1.1 1.1
5 Mechanical impurities,%, max none
6 Water content, max traces
7 Density at 20 °C, kg/m3, max 890 890 900 910
8 Pour point, °C, max Minus 15
9 Color on CNT colorimeter, CNT units, max 2.0 2.5 3.0 4.5
10 Open cup flash point, °C, min 200 210 220 225
11 Oxidation  stability: increase in acid number of oxidated oil, mg КОН / 1 g of oil, max increase in
gums,%, max
0.30
2.0
0.40
3.0
0.40
3.0
0.40
3.0
12 Solvents content in solvent‑refined oils none
13 Water soluble acids and alkalis content in alkali‑refined oils

IGP-18, IGP-30, IGP-38, IGP-49, IGP-72 INDUSTRIAL OILS are produced in accordance with TU 0253–053–00151911–2008 and are intended for use in hydraulic systems of machining, pressure and other equipment, as well as for lubrication of low- and medium-loaded geared drives and worm drives.

No. Property IGP‑18 IGP–30 IGP–38 IGP–49 IGP–72
1 Appearance Homogeneous transparent liquid
2 Color on CNT colorimeter, CNT units, max 2.0 2.5 3.0 3.5 5.0
3 Kinematic viscosity at 40 °C, mm2/s 24.0–30.0 39.0–50.0 55.0–65.0 76.0–85.0 110.0–125.0
4 Viscosity index, min 90 90 90 90 85
5 Density at 20 °C, kg/m3, max 880 885 890 895 900
6 Acid number, mg КОН / 1 g of oil, max 1.0 1.0 1.0 1.0 1.0
7 Ash content,%, max 0.2 0.2 0.2 0.2 0.2
8 Open cup flash point, °C, min 180 200 210 215 220
9 Pour point, °C, max Minus 15 Minus 15 Minus 15 Minus 15 Minus 15
10 Mechanical impurities mass fraction None
11 Water mass fraction, max Traces
12 Sulfur mass fraction, max 1.0 1.0 1.0 1.0 1.0
13 Zinc mass fraction,%, min 0.04 0.04 0.04 0.04 0.04
14 Copper strip corrosion test, rating, max 1b 1b 1b 1b 1b
15 Corrosion resistance: corrosion level None
16 Foaming tendency/ foam stability, cm3, max
а) at 24 °C 50/5 50/5 50/5 50/5 50/5
б) at 94 °C 50/5 50/5 50/5 50/5 50/5
в) at 24 °C after test at 94 °C 50/5 50/5 50/5 50/5 50/5
17 Thermal oxidation stability: acid number increase in 1000 hours, mg КОН / 1 g of oil, max 2.0 2.0 2.0 2.0 2.0
18 Sedimentation number: sediments content (volumetric fraction),% Absence

Production of IGP‑72 industrial oils with pour point “max minus 10 °C” is allowed from April 1st till September 1st